Friday, September 6, 2013

DIY Reclaimed Wood Framed Mirror


Years and years ago, probably when I was in college, I bought a $10 standing mirror at Target. Tacky cheap frame and all. A few years ago, that tacky cheap frame broke off and got tossed. And the mirror never got replaced! It just sat there, naked and bare, against my bedroom wall. Talk about tacky.
But it is tacky no more!

Thanks to my brother and his torn down shed, I obtained a good pile of old, weathered, reclaimed wood. I brought it home for another project (sneak peak at the end of this post), and used some of the extra scraps to make a frame for this sad and lonely mirror.

The pieces weren't quite long enough for me to do angled corner cuts, but I think the straight cuts work due to the rustic-ness of the wood.

I did have to deal with a little bit of warping, but it wasn't too bad. I love the cracks and knots and holes and coloring in the wood.


Now I have no training in this type of construction, but I did a little research, a little brainstorming, and just kind of figured it out. It's not rocket science. So if you're interested, here's how I did it.

1. I first glued all the pieces together with liquid nails (carefully measuring the inside space to make sure it was all squared, given the warping). No wait. I first measured and cut, and scrubbed with a brush to remove loose particles. A very light sanding too, but you can't do much or it takes that weathered finish right off.

2. I then screwed in the corner braces you see below. Most of them are crooked because of trying to avoid cracks, or reinforce cracks in the wood. It doesn't need to be pretty on the back (though I would prefer it).


3. In the above picture you can see I filled in a crack or two with liquid nails. Unnecessary, but I figured why not. A little reinforcement can't hurt. And see that duct-taped corner below? I know, I know, why am I still holding on to this old mirror? Because I can't stand to just toss it when it will work fine. I chipped that mirror corner in the process, but just a little, so I taped it for safety and it's hidden anyway.

4. After the frame was secured together, I used a little liquid nails (ignorance on my part--shoulda' used Mirror Mastic--if I had known what it was) to glue the mirror to the frame.

5. Then I added mirror clips (more visible in the above photo) to really hold the mirror on there. And that's it! I started to spray it with a sealant but had a hard time getting an even coat, plus I figured it's been so weathered that any old chemicals that were on there are pretty much washed and worn away by the years of weather.



And here's a little peak at a few other things. Me at 16 weeks (I'm pregnant!) And also these are some old work pants I cut off and turned into Bermuda shorts. They were a bit flared at the bottom so I hadn't worn them in years, but they fit nicely in the waist and behind so I hated to toss them. Perfect solution and super easy to do, a great way to upcycle your clothes. Of course with my growing belly, this will probably be the last time I wear them for a while.

And one last thing. The purpose of my collecting the reclaimed wood in the first place was to make a headboard for my bed. I'll show you the whole thing once I get a duvet cover and some night stands (can you tell my bedroom is in sorry shape?). But this will have to do for now:

Pin It